Telescoping sample probe – INFICON Explorer Portable Gas Chromatograph User Manual
Page 45
Advertising
Introduction
Telescoping Sample Probe
A two
and a half meter (8'), telescoping, extension probe (MX380311) may be
connected to the
Explorer sample in port for remote sampling. The probe can be
mounted to the side of the instrument to facilitate portable operation.
WARNING
Do not connect the mounting clips to
Explorer in hazardous locations.
Connecting the Probe
Place Probe
Clips Here
Figure 4 Placement of Plastic Probe Clips
1. Remove the screw located below the carrier gas contents gauge.
43
Advertising