Connecting accessories, Personal computer running sitechart software, Dc power cord – INFICON Explorer Portable Gas Chromatograph User Manual
Page 43
Introduction
Connecting Accessories
Personal Computer running SiteChart Software
In order to utilize all of
Explorer’s features you will need to use the SiteChart
software. To do this you must connect
Explorer to a compatible PC and set up the
instrument from the PC. Complete specifications for the required PC and details
on connecting the PC to
Explorer are covered in SiteChart Software starting on
page 99.
DC Power Cord
Explorer can be connected to a car battery through the cigarette lighter with the DC
power cord (MX380313).
NOTE: If the car is running you must ensure the car exhaust does not interfere with the
samples.
WARNING
Do not connect the DC power cord to
Explorer in hazardous locations.
1. Turn the instrument off.
2. Connect the DC power cord (MX380313) to
Explorer AC adapter port.
3. Connect the other end of the DC power cord to the cigarette lighter in the car.
4. Turn the instrument on again.
NOTE: For extended operation, you should use a fully charged battery pack
951-402-G1.
41