INFICON Guardian EIES Controller - Manual (Page 112)

4 - 20
IP
N 07
4-
51
7-
P1
D
Guardian Co-Deposition Controller Operating Manual
4.6.4 Sensor(s)
Connect the sensor filament cable (IPN 600-1407-P10 [10 ft. (3 m)] or P40 [40 ft.
(12 m)] Dual or 600-1406-P10 or P40 Single) from the controller to the appropriate
electrical connections on the sensor feedthrough.
WARNING - Risk Of Electric Shock
The sensor outputs are energized at ±180 V (dc) and
constitute a potential shock hazard. If a sensor cable is
damaged, contact
INFICON for a replacement.