2 detector — direct installation, 3 sensor to fiber optic installation, 2 detector—direct installation – INFICON Guardian EIES Controller User Manual
Page 27: Caution
2 - 3
IP
N 07
4-
51
7-
P1
D
Guardian Co-Deposition Controller Operating Manual
2.2.2 Detector—Direct Installation
For single detector applications, the detector may be mounted directly to the
sensor assembly viewport. Please see
section 4.3.2, Single-Detector Systems, on
for detailed installation instructions.
2.2.3 Sensor to Fiber Optic Installation
In multi-material applications, a fiber optic beam splitter attached to the viewport
can tailor signal transmission and detector mounting to your needs. Contact
INFICON for fiber optic beam splitting requirements and capabilities. Please see
section 4.3.3, Multiple-Detector Systems, on page 4-8
for detailed installation
instructions.
CAUTION
Be sure power to the PMT Detector Module is turned off
whenever the PMT is exposed to room light to avoid
damage to the PMT.