INFICON Guardian EIES Controller - Manual (Page 73)

3 - 21
IP
N 07
4-
51
7-
P1
D
Guardian Co-Deposition Controller Operating Manual
Ratio Filter: The number of readings averaged for the ratio display. 0 disables the
function. Because we are dividing two channels, and possibly multiplying their
readings, a larger filter may be desirable.
The value displayed is:
Ratio Display = (Chan. Reading x Chan. Multiplier) /
(Ratio Chan Reading x Ratio Chan Multiplier)
[5]
3.6.5 Edit Layer Film Tab
NOTE: The parameters on the Film tab are Film parameters. They are determined
by the Film selected for a layer. If you change the parameters on either of
these tabs, they will be changed for any layer (in any process) that uses
the selected film.
Figure 3-17 Edit Layer Film display