2 setup layer parameters – INFICON Guardian EIES Controller User Manual
Page 47
Advertising
2 - 23
IP
N 07
4-
51
7-
P1
D
Guardian Co-Deposition Controller Operating Manual
2.5.2 Setup Layer Parameters
Display the Edit Layer dialog box for the channel you are using by clicking the Edit
button to the left of that channel on the main screen. Select the Layer tab of the
Edit Layer dialog box, see
, and verify that the Endpoint is a value high
enough to avoid prematurely halting the process during calibration.
Figure 2-23 Endpoint Value
On the Film tab, verify that the Full Scale voltage matches the input of your power
supply. Also verify that Max. Power is consistent with the material you are
evaporating.
Advertising