Lenze E94AYAE SM301 - Manual (Page 116)

6 Error messages
116
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Test pulse error - internal disconnecting path [0x012f005e]
SS1/SS2: Stopping time exceeded [0x012f0061]
SLS1: Nlim1 exceeded [0x012f0062]
SLS2: Nlim2 exceeded [0x012f0063]
SLS3: Nlim3 exceeded [0x012f0064]
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 94
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Internal error of safe switch-off logic. Replace safety module. Contact Lenze.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 97
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The drive has not reached the parameterised zero-speed
threshold within the stop time.
• Increase SS1/SS2 stop time.
• Reduce delay time in drive.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 98
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The drive has exceeded the limited speed (SLS1). • Adapt the speed-dependent parameters in the drive.
• Increase speed threshold Nlim.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 99
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The drive has exceeded the limited speed (SLS2). • Adapt the speed-dependent parameters in the drive.
• Increase speed threshold Nlim.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 100
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
The drive has exceeded the limited speed (SLS3). • Adapt the speed-dependent parameters in the drive.
• Increase speed threshold Nlim.