Lenze E94AYAE SM301 - Manual (Page 82)

5 Parameter reference
5.1 Parameter list | C15100
82
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C15100
C15101
C15111
C15112
Parameter | Name:
C15100 | S bus: Configuration
Data type: UNSIGNED_8
Index: 9475
d
= 2503
h
Configuration of the safe bus system.
 Safety bus
Selection list (Lenze setting printed in bold) Info
0 No safety bus
1 PROFIsafe / PROFIBUS
2 PROFIsafe / PROFINET
From V1.1
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15101 | Current DIP switch display
Data type: UNSIGNED_16
Index: 9474
d
= 2502
h
Display of the DIP-switch setting (safety address) on the safety module.
 Safety address
Display range (min. value | unit | max. value)
0 1023
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15111 | Safety address
Data type: UNSIGNED_16
Index: 9464
d
= 24F8
h
Safety address in the safety module.
 Safety address
Setting range (min. value | unit | max. value) Lenze setting
0 65534 0
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15112 | Effective safety address
Data type: UNSIGNED_16
Index: 9463
d
= 24F7
h
Effectively used safety address in the safety module.
 Safety address
Display range (min. value | unit | max. value)
1 65534
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1