Lenze E94AYAE SM301 - Manual (Page 89)

Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
89
5 Parameter reference
5.1 Parameter list | C15317
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C15317
C15320
C15321
C15330
Parameter | Name:
C15317 | SS1, SS2: Ramp - start-offset
Data type: UNSIGNED_8
Index: 9258
d
= 242A
h
From V1.4
Speed offset for the start of ramp monitoring.
 Safe stop
Setting range (min. value | unit | max. value) Lenze setting
0 % 30 0 %
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15320 | SMS: Maximum speed Nmax
Data type: UNSIGNED_16
Index: 9255
d
= 2427
h
Activation of the SMS function and selection of the maximum speed.
• The setting Nmax = 0 deactivates the function.
 Safe maximum speed (SMS)
Setting range (min. value | unit | max. value) Lenze setting
0 rpm 16000 1 rpm
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15321 | SMS: Reaction (n>Nmax)
Data type: UNSIGNED_8
Index: 9254
d
= 2426
h
Reaction to exceeding the set maximum speed Nmax.
 Safe maximum speed (SMS)
Selection list (Lenze setting printed in bold) Info
0 STO  Safe torque off
1 SS1  Safe stop 1
2 SS2  Safe stop 2
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15330 | SLS: Limited speed Nlim
Data type: UNSIGNED_16
Index: 9245
d
= 241D
h
Setting of the safely limited speed.
 Safely limited speed (SLS)
Setting range (min. value | unit | max. value)
0 rpm 16000
Subcodes Lenze setting Info
C15330/1 0 rpm SLS1: Limited speed Nlim1
C15330/2 0 rpm SLS2: Limited speed Nlim2 (from V1.1)
C15330/3 0 rpm SLS3: Limited speed Nlim3 (from V1.1)
C15330/4 0 rpm SLS4: Limited speed Nlim4 (from V1.1)
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1