Lenze E94AYAE SM301 - Manual (Page 120)

6 Error messages
120
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Stuck at High SD-Out1, channel B [0x012f0082]
Stuck at Low SD-Out1, channel B [0x012f0083]
Stuck at High at SD-In1, channel A [0x012f0090]
Stuck at High at SD-In1, channel B [0x012f0091]
Stuck at High at SD-In2, channel A [0x012f0092]
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 130
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Channel B of output SD-Out1 cannot be deactivated. Check wiring at the output SD-Out1 for short circuit.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 131
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Channel B of output SD-Out1 cannot be activated. Check supply voltage and wiring for the safe output.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 144
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Channel A of input SD-In1 cannot be deactivated. • Check wiring at the safe input for short circuit.
• Check configuration for the safe input.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 145
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Channel B of input SD-In1 cannot be deactivated. • Check wiring at the safe input for short circuit.
• Check configuration for the safe input.
Module ID (decimal) Error ID (decimal)
303: SM301 safety module 146
Response (Lenze setting printed in bold)
 None  System error  Error  Fault  Quick stop by trouble  Warning locked  Warning  Information
Cause Remedy
Channel A of input SD-In2 cannot be deactivated. • Check wiring at the safe input for short circuit.
• Check configuration for the safe input.