Lenze E94AYAE SM301 - Manual (Page 74)

5 Parameter reference
5.1 Parameter list | C15013
74
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C15013
C15014
C15015
C15016
C15017
Parameter | Name:
C15013 | Parameter set creation time
Data type: UNSIGNED_64
Index: 9562
d
= 255A
h
Time of parameter set creation.
Display range
(min. value | unit | max. value)
0 2 64 -1
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15014 | Time of RTC parameter setting
Data type: VISIBLE_STRING
Index: 9561
d
= 2559
h
Time of acceptance of the parameter set from the memory module as value of the real-time clock (RTC).
 Read access  Write access  CINH  PLC-STOP  No transfer
Parameter | Name:
C15015 | Time of sec. parameter setting
Data type: UNSIGNED_32
Index: 9560
d
= 2558
h
Time of acceptance of the parameter set from the memory module as value of the power-on time meter from the
controller.
Display range
(min. value | unit | max. value)
0 s 4294967295
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15016 | Parameter set version
Data type: UNSIGNED_8
Index: 9559
d
= 2557
h
From V1.1
Display of the parameter set version available in the safety module.
Selection list
(read only) Info
0 No current parameter set
1 Parameter set V1.0
2 Parameter set V1.1
3 Parameter set V1.2
From V1.2
4 Parameter set V1.3 From V1.3
5 Parameter set V1.4 From V1.4
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15017 | Stored module ID
Data type: UNSIGNED_16
Index: 9558
d
= 2556
h
From V1.2
Display range (min. value | unit | max. value)
0 65535
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1