Lenze E94AYAE SM301 - Manual (Page 86)

5 Parameter reference
5.1 Parameter list | C15204
86
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C15204
C15205
C15300
C15305
Parameter | Name:
C15204 | SLI: Value of position change
Data type: UNSIGNED_32
Index: 9371
d
= 249B
h
From V1.4
Value of the maximum position change while SLI has been active.
 Operation mode selection
Display range (min. value | unit | max. value)
0 Incr. 2147483647
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15205 | SSE: Emergency stop function
Data type: UNSIGNED_8
Index: 9370
d
= 249A
h
Selection of the stop function for emergency stop.
 Emergency stop function (SSE)
Selection list (Lenze setting printed in bold) Info
0 STO  Safe torque off
1 SS1  Safe stop 1
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15300 | Restart behaviour
Data type: UNSIGNED_8
Index: 9275
d
= 243B
h
Setting of the restart behaviour after deactivation of the STO, SS1, SS2 and SOS standstill function.
 Safe stop
Selection list
0 Acknowledged restart
1 Automatic restart
Subcodes Lenze setting Info
C15300/1 0: Acknowledged restart Restart - STO, SS1
C15300/2 0: Acknowledged restart Restart - SS2, SOS
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15305 | SS1, SS2: Stopping time
Data type: UNSIGNED_16
Index: 9270
d
= 2436
h
Stopping time for the SS1 and SS2 safety functions.
 Safe stop
Setting range (min. value | unit | max. value) Lenze setting
0 ms 30000 0 ms
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1