Lenze E94AYAE SM301 - Manual (Page 24)

2 Introduction
2.6 Error management
24
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Short overview of the relevant parameters:
Parameter Info Lenze setting
C15890 Current time - ms
C15891 Log function Logging active
C15892/1...10 Log time
• Time of the entry in milliseconds since switch-on
of the module supply.
- ms
C15893/1...10 Log status
• Status (bit coded) at the time displayed in
C15892/1...10 .
-
Highlighted in grey = display parameter

Note!
Before the display parameters of the logbook are read out for purposes of diagnostics,
the logbook function should be stopped by selecting "1: Logging stopped" in C15891 , in
order to avoid inconsistencies.