1 changing parameter settings, Changing parameter settings, 3safe configuration – Lenze E94AYAE SM301 User Manual
Page 26
3
Safe configuration
3.1
Changing parameter settings
26
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.1
Changing parameter settings
How to change a parameter setting:
1. Select the parameter to be altered from the list.
2. Enter the new value in the Value column, or select it from the options defined.
• Invalid or impermissible values are "red" in the input field.
• A selection from the list field may cause a deactivation of parameters which are now
irrelevant due to the selection (marked by a grey background colour).
3. Press the <Return key> or click into another box to accept the changed value.
• You can reject the entry by pressing the <Esc> key.
Tip!
The parameter settings of the safety module can also be displayed in the »Engineer«
parameter list (All parameters tab Safety module SM301) category and on the keypad.
Changes, however, are only possible via the Safe configuration tab!
Note!
Changed parameters of the safety module are not automatically transmitted to the
device, even if an online connection has been established!
The parameter set for the safety module is only safely transmitted when clicking the
Send button in the Safe transfer dialog box!