Lenze E94AYAE SM301 - Manual (Page 96)

5 Parameter reference
5.1 Parameter list | C15801
96
Lenze · SM301 safety module · Parameter setting & configuration · DMS 2.3 EN · 11/2013 · TD05
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C15801
C15805
C15810
Parameter | Name:
C15801 | Error history
Data type: UNSIGNED_16
Index: 8774
d
= 2246
h
List with internal error numbers for service operations.
Please forward error history to the Lenze Service on request.
Note:
The universally valid error messages of the safety module are entered in code C00168 and in the logbook of the
controller. Details relating to this are described in the " Error messages " chapter.
Display range (min. value | unit | max. value)
0 65535
Subcodes Info
C15801/1 Error history 1
C15801/2 Error history 2
C15801/3 Error history 3
C15801/4 Error history 4
C15801/5 Error history 5
C15801/6 Error history 6
C15801/7 Error history 7
C15801/8 Error history 8
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15805 | Service code
Data type: UNSIGNED_32
Index: 8770
d
= 2242
h
Display of information if parameter set was not successfully checked for plausibility.
Display range
(min. value | unit | max. value)
0 4294967295
Subcodes Info
C15805/1 Service code
C15805/2 Service code
C15805/3 Service code
 Read access  Write access  CINH  PLC-STOP  No transfer Scaling factor: 1
Parameter | Name:
C15810 | Service code
Data type: BITFIELD_32
Index: 8765
d
= 223D
h
Display of internal control words.
Display range
0x00000000
0xFFFFFFFF
Value is bit-coded: Info
Bit 0 STO  Safe torque off
Bit 1 SS1  Safe stop 1
Bit 2 SS2  Safe stop 2
Bit 3 SLS1  Safely limited speed 1
Bit 4 SLS2  Safely limited speed 2 (from V1.1)
Bit 5 SLS3  Safely limited speed 3 (from V1.1)
Bit 6 SLS4  Safely limited speed 4 (from V1.1)