Wasp Barcode Inventory Control - Manual (Page 111)

InventoryControl Printable Help
Complete the fields on this screen as described below:
 Primary Location - Select this checkbox if this will be the primary location at this site
for this item. A primary location can be selected for each Site you have setup in the
system. When you select a primary location, when you Receive quantities of that
item from a purchase order, they will automatically be assigned to that location. Also,
when you Pick quantities of that item for pick orders, they will automatically be
removed from that location. You can change these locations when picking and
receiving if necessary. In addition, the primary location will appear in any location
fields (on the Add inventory screen, for example), however; you can change the
location, if needed.
Only one primary location can be selected per site.
 Site and Location - Click in the box and select a Site and Location from the drop
down list. Only sites and locations you have previously selected will appear in this
list. Select More to view the Site or Location List. You can also select New
Location or New Site to access the Create New screen. These represent the site
and the location where the inventory will reside.
 Quantity - This number is populated from the Inventory for this item. This number
displays how many of this item is currently in stock at the selected site and location.
When you first create your item, this number will be zero. After you build your
Assembly Item, this field will reflect the number you built (which is the quantity in
stock).
96