Wasp Barcode Inventory Control - Manual (Page 124)

InventoryControl Printable Help
9. You can optionally enter a Customer in the Customer field.
10. When you have completed the information on this screen, click Disassemble.
The Disassemble button will not be enabled until all required information is entered in the
appropriate fields. The Commit button will not be enabled until at least one Add is posted to the
Pending Transaction List.
If any of the component items are tracked (by serial number, for example), you will be taken to
the Add screen after you click Disassemble.
The Add screen lists all component items for this Assembly Item. Items that appear with a
green checkmark are ready to be added.
Items that are not checked need additional information, usually a Track By.
Note: If this Assembly Item has been modified, the View Config History button, shown below,
will appear at the top of the screen.
109