Wasp Barcode Inventory Control - Manual (Page 409)

InventoryControl Printable Help
20.8.2 Batch Windows Mobile Device - Setup the Mobile Device
This is the first step in sending the InventoryControl database to your mobile device.
Note: This applies to batch devices only. If you are using a wireless connection you will not need to
manually send information to the mobile device. Your mobile device will be connected directly to the
database and any changes/additions you make on the mobile device will immediately update the
database and vice versa. For information about using a wireless connection, please refer to the topic
Using a Mobile Device with a Wireless Connection .
Setting Up the Mobile Device:
1. On the InventoryControl Main screen, click the Mobility icon. A menu will appear allowing you
to select which device you will be working with. If you have only one type, the Mobility Menu for
that device will appear at the bottom of the screen.
2. On the Mobility Menu, select Setup Mobile.
The Wasp Mobile Device Communication Wizard opens with the Mobile Device Setup tab
selected.
If this is the first install of the program on the mobile device, the software will automatically send
the Platform, Program and a Clean Database to the mobile device.
Once the mobile device has been found, the Setup Mobile Device tab displays the following
information:
394