Wasp Barcode Inventory Control - Manual (Page 347)

InventoryControl Printable Help
Adjust
100007
Monitor
Date Code:
ESC=Cancel
F1=Prev F4=Next
Key in or scan values for each of the Tracked By fields, pressing F4 to advance to the next data
entry field.
If you press F4 to advance to the next data entry field, without first inputting a required Tracked By
value, a screen similar to the following will be displayed:
Please scan or key
in Date Code
ESC=Exit
Press ESC to exit the error message and then provide the required Tracked By value (a Date
Code, in this example).
Looping on Serial Number:
Fields can be looped, or pinned, by pressing the F3 key. An asterisk displays next to the looped field.
If track by Serial Number is enabled for this Item, the Qty field will be set to 1. A quantity of one is
assumed for each Serial Number. Looping will determine the final count for this Adjust transaction, as
you scan (or key in) one or more Serial Numbers for this Item:
1000066
Qty:1
SN: *
Count:0
F4=Done
As each SN is keyed in or scanned, the Count will be increased. Press ENT after inputting each serial
number.
Press F4 after entering the last Serial Number to the Adjust screen.
Notes:
 When an Item is tracked by Serial Number, you can only loop on Serial Number.
 When an Item is not Tracked By Serial Number, you can use F3 to designate a field that will be
used for looping. The values in every field except Qty will remain locked while looping.
332