Wasp Barcode Inventory Control - Manual (Page 342)

InventoryControl Printable Help
In the example shown above, Qty at Loc has a value of 500.00000, showing that 500 of the 626
Total Qty are at Location 1. The TrackBy Qty is 0.00000 because no Tracked By options are
enabled,entered or valid for this Item #.
19.14.2 Viewing Details for Items with One or More Tracked By Options Enabled:
When a Location value has been entered for an Item # that has one or more Tracked By options
enabled, you will be given the opportunity to narrow the Details display by entering values for any of the
Tracked By fields displayed on the consecutive screens. Press F4 to advance to each field.
If an item has all four Tracked By options enabled, all are available for inputting values which you can
use to limit the TrackBy Qty that will shown in the Details display.
Input fields will only be displayed for those Tracked By options that are enabled for the Item specified.
1. The Details function can be accessed by pressing the 5 key on the PDT Main Menu or the 2 key
if the PDT is in Audit Mode. The screen shown below appears:
Details
Item #:
Scan or key in value
and press Ent.
Press ESC for Menu
2. Press the PDT's ENT key after supplying an Item # or press the PDT's ESC key to return to the
Main Menu.
If the Item # you enter is not found in the PDT's database, you will be prompted to try again, as
shown below:
Details
Item #:
9999999
Entry not found.
Scan or key in
value and perss
Ent. ESC=Menu
If the Item # entered is found in the database, the Item's Description will be displayed beneath
the Item #.
Details
10067
Mouse
Pallet:
33
ESC=Cancel
F1=Prev F4=Next
327