Wasp Barcode Inventory Control - Manual (Page 427)

InventoryControl Printable Help
2. Use the Upload Selection screen to select one of the sets of data that has been download
from a mobile device. There may be several files in the list, depending on how many mobile
devices you use and how often you do this step to process accumulated files.
We recommend that you always select the oldest file and process those transactions first.
The example above shows transactions uploaded from WindowsCE232 on May 31, 2007 at
19:31:30.
The device WindowsCE232 has been selected from the drop down list that displays all the mobile
ed
so
that the number of new Customer, Supplier or Location records
e quantity shown in Step 1. This can happen when an
er or Location was not downloaded to the mobile device due to filtering
devices that have transferred mobile data to the PC, but have not yet been uploaded into the
InventoryControl database.
3. Click Next.
If you had a new addition (customer, location, etc.) the New Records screen appears listing
these. You can accept or reject each of them. If the new data was created in error, you can al
assign an existing value to take its place.
If no new Customers, Suppliers or Locations were created by the mobile device User,
InventoryControl will skip this step.
On occasion, you might notice
displayed here in Step 2 are less than th
existing Customer, Suppli
done creating a mobile database. When the mobile device user subsequently specifies a "new"
Customer, Supplier or Location while performing an inventory transaction, the "new" mobile
device record gets automatically mapped to the existing PC record between Steps 1 and 2.
412