Wasp Barcode Inventory Control User Manual
Page 326
Advertising
InventoryControl Printable Help
7) Press the Escape
key to exit the system menu and return to the default power-on
prompt.
You should now perform the
Setup Device
function to load the InventoryControl program to your
WDT2200.
Instructions for Setting Date and Time on a WDT2200 That Already Has InventoryControl Installed:
1) If the InventoryControl
is currently displayed:
select 8-LOGOUT to exit to the InventoryControl
Log On
screen:
InventoryControl
User:
Password:
2) From the Log On screen, power off the WDT2200 by pressing and holding the power
key
until no text is displayed on the screen.
3) With the WDT2200 powered off...
...hold down the CMD and left-arrow keys, then press the power key.
A START MENU will be displayed:
311
Advertising