Wasp Barcode Inventory Control User Manual
Page 119
InventoryControl Printable Help
Note: To prevent fields from clearing, click the pushpin
button located to the right of the field
you want to lock. This is helpful when you have to perform multiple Builds at one Location, for
example. Pushpins can be used to lock the values in all but one required field so that a scanner
can be used to rapidly add inventory just by repeatedly scanning barcodes into that field. The
Build Assembly button does not have to be clicked between each scan to post these
transactions to the Pending Transaction List. If any additional information, such as serial
numbers is needed for one or more sub-items tied to this Assembly Item, you will be taken to the
Remove screen so you can add this information. See below for information on using the
Remove screen.
Clicking the
button will unlock the field.
3. In
the
Item Number field, enter the Item Number of the Assembly Item you want to build. The
drop down list will display the last five items selected. Click More to view the Item List. The
Item List will be filtered to only show Assembly Items. Click New to
4. If one of the sub-items has a default location, that location will appear in the Location field. If
more than one sub-item has a default location, the field will appear blank. You can change the
Location by clicking on the field and entering a new location.
5. Now you can enter the quantity you want to build. Note that the system tells you the maximum
number you can build. This number is based on how many of each sub-item you on hand.
104