Wasp Barcode Inventory Control - Manual (Page 350)

InventoryControl Printable Help
An asterisk (*) indicates the intention to do more than one adjust for this Item #, for more than one Pallet.
Values entered for Item #, Location, PO, Supplier, and any other Tracked By fields will remain locked
while looping on Pallet, after entering them for the first adjust:
123
Qty:
Pallet: *
Total Qty:
30.00000
F4=Done
Above, having entered a value for Pallet and a value of 30 for Qty on the previous screen for the first
adjust, this screen is ready to receive inputs for another adjust. Item #, Location, PO and Supplier
values for this second adjust will be the same as those supplied at the beginning of the loop.
While looping on this Tracked By field, all that is required for each adjust are values for Qty and Pallet.
The Total Qty is incremented each time an adjust is submitted while looping.
Press the ENT key to submit the adjust transaction and continue looping
or
Press the F4 key to exit the loop.
When looping on a Tracked By field, all items entered should have the same Tracked By requirements. If
a different Tracked By field is required, you will be prompted to enter the information before continuing.
Looping will need to be restarted.
335