Wasp Barcode Inventory Control - Manual (Page 444)

InventoryControl Printable Help
6. On the Main tab, select your network from the Active Profile list.
7. Click OK. The RF is now enabled.
Programs > Bluetooth > Bluetooth Power On), then selected SCAN twice. When Bluetooth locks up,
luetooth Manager. If your Bluetooth connection becomes frozen,
n or a paperclip in the re
Error: Bluetooth Locks Up:
Your Bluetooth connection may become frozen if you have manually enabled Bluetooth (Start >
you will not be able to open a connection from Start > Settings > Control Panel > Bluetooth or from
Start > Programs > Bluetooth > B
follow the steps below:
Insert a pi set button located on the front of the WDT3250II. This causes a warm
boot of the mobile device.. Now Bluetooth > Bluetooth Manager will open.
a Wireless Connection
20.10. WPA1000 and WPA1000II Tips
TIPS:
2
Setting up
Enabling Bluetooth and Printing to a Local Printer
ERRO
M
RS:
obile Device Locks Up
Receiving Connection Error When Trying to Access InventoryControl RF
Tip: Setting up a Wireless Connection
To enabl reless capabilities on the WPA1000 device, perform the following steps:
uter, unplug it. You cannot set up WiFi with the
1000.
er-corner, to the right of the keyboard icon, there is
n as shown in the graphic below:
e and set up wi
1. If your WPA1000 device is plugged into a comp
device plugged into a computer.
2. Close all applications on the WPA
3. On the Main screen, in the far-right, low
another icon that may be partially hidde
429