Wasp Barcode Inventory Control User Manual
Page 423
Advertising
InventoryControl Printable Help
7. After checking to make sure the device is connected to your PC, click Next. A status bar will
appear as the data is transferred. A confirmation message appears after the transfer is complete:
8. Click
Finish to close the Wizard screen.
Mobile Device Procedure
On the mobile device, you will see a message similar to the following:
Click OK to insert the records into the mobile database. InventoryControl automatically starts on the
device after the transfer.
See the
Mobile Device Troubleshooting
topic if you encounter errors while using this function.
408
Advertising