Wasp Barcode Inventory Control - Manual (Page 424)

InventoryControl Printable Help
20.8.4 Batch Windows Mobile Device - Retrieving Data from the Device
The Send Data to PC function enables you to send data from the mobile device to your PC. You will use
this function after you have performed transactions (add, move, etc.) and need to send the data back to
the PC.
Note: This applies to batch devices only. If you are using a wireless connection you will not need to
retrieve information from the mobile device. Your mobile device will be connected directly to the
database and any changes/additions you make on the mobile device will immediately update the
database. For information about using a wireless connection, please refer to the topic
Using a Mobile
Device with a Wireless Connection .
Sending Data to the PC:
1. On the InventoryControl Main Window, click the Mobility icon. If you have more than one type
of mobile device installed, a menu will appear allowing you to select which device you will be
working with. If you have only one type, the Mobility Menu for that device will appear at the
bottom of the screen.
2. On the Mobility Menu, select Get Data From.
The Wasp Mobile Device Communication Wizard screen displays with the Mobile Device to
PC tab displayed:
409