Wasp Barcode Inventory Control - Manual (Page 157)

InventoryControl Printable Help
 Customer
 Notes
Below is an example of the Remove screen with the fields enabled:
You can use the drop down list of any enabled field to select an existing value for that field.
Note: If the Automatic New option is enabled on the Options screen, the Create New Customer
screen will be opened automatically if an unknown Customer is entered. If the Automatic New
option is turned off when an unknown Customer is entered, a prompt will ask if you want to use the
Create New screen. For more information on the enabling and disabling the Automatic New option,
please refer to the
Options screen topic.
4. Complete the Track By fields: The Track By fields do not apply to WaspNest Inventory. As
mentioned above, the Track By fields are enabled based on the Item Number you enter. If there are
no Track Bys set for the selected item, these fields will be disabled. Track By fields are enabled or
disabled at the time the item is entered on the Create New Item screen or when editing an item on
the Edit Item screen.
Since you can only remove existing quantity, if the Tracked By item you are removing is not in the
list, make sure you have the right Item Number and Location. The Tracked By fields will only show
values that are possible for the selected Item Number and Location. (If an item with a given Serial
Number is not in the list, it may be Checked-Out, and thus, not removable.) If you still do not see
the Tracked By information you expect, you should make sure the selected Item Number at the
142