Wasp Barcode Inventory Control - Manual (Page 397)

InventoryControl Printable Help
5. The quantity ordered for this item on the PO will appear followed by the order unit quantity. The
order unit quantity is the unit of measure used by this supplier for shipping purposes. In the
example below, 100 boxes were ordered, each box contains 10 items and 1 is being received.
Receive
1001
Monitor
PO Qty: 100.0000
box/10.0000:
1
ESC=Cancel
F1=Prev F4=Next
Note: If this item has any track bys set (serial number, date code, pallet, etc.), you will required to
enter those prior to entering a quantity. If this item is tracked by Serial Number, the quantity is
limited to 1.
6. Press F4 to complete the transaction.
Looping on Serial Number:
Fields can be looped, or pinned, by pressing the F3 key. An asterisk displays next to the looped field.
If track by Serial Number is enabled for this Item, the Qty field will be set to 1. A quantity of one is
assumed for each Serial Number. Looping will determine the final count for this Receive transaction, as
you scan (or key in) one or more Serial Numbers for this Item:
1000066
Qty:1
SN: *
Count:0
F4=Done
As each SN is keyed in or scanned, the Count will be increased. Press ENT after inputting each serial
number.
Press F4 after entering the last Serial Number to the Receive screen.
Notes:
 When an Item is tracked by Serial Number, you can only loop on Serial Number.
 When an Item is not Tracked By Serial Number, you can use F3 to designate a field that will be
used for looping. The values in every field except Qty will remain locked while looping.
382