Wasp Barcode Inventory Control User Manual
Page 479
InventoryControl Printable Help
it
measure here. For instance, if you are receive 1 box of 10, enter 1 rather than 10.
down to 10 for you.
5. Enter the Quantity of the Item to be received. Keep in mind that you should enter the Order Un
of
InventoryControl will do the math behind the scenes and break the shipment
Note: If this item were tracked by serial number, the quantity would be entered in eaches since
If you enter a quantity that is higher than the quantity entered on the Purchase Order, a warning
will appear. You can continue with the higher quantity if you so choose.
6. When all required information is entered, tap OK. The Item(s) is marked as Received and the
Receive screen resets, ready for the next Item to be received.
Tapping the Reset button clears all fields and restores all available fields to the Receive screen
display.
7. When you are finished with the Add screen, tap Close to return to InventoryControl main menu.
See the
Windows Mobile Device Troubleshooting
you can only have 1 item per serial number.
topic if you encounter errors while using this
function.
464