Wasp Barcode Inventory Control - Manual (Page 352)

InventoryControl Printable Help
Audit
Item #:
123
Scan or key in value
and press Ent.
Press ESC for Menu
If the Item # you entered is not found in the PDT's database, you will be prompted to try again.
Audit
Item #:
9999999
Entry not found.
Scan or key in value
and press Ent.
ESC=Menu
If the Item # entered is found in the database, the Item's Description will be displayed beneath
the Item #:
3. Scan or key in a Location value. The Location field is required for all Audit transactions.
Audit
10007
Monitor
Location:
AREA 2
ESC=Cancel
F1=Prev F4=Next
Enter a Location and press F4 to advance to the next data entry field.
or
Press F1 to go back to the previous data entry field.
or
Press ESC to cancel transaction and return to the previous screen.
If you press F4 to advance to the next data entry field, without first providing a Location value,
the following message will be displayed:
Please scan or key
in Location
ESC=Exit
Press ESC to Exit the error message and then provide the required Location value.
As shown below, if you enter a Location that's not currently in the PDT database, you will be
prompted to accept or reject the entry as a new value to be added to the database. The currently
selected
Source Site will be displayed when you are about to create a new Location.
337