Wasp Barcode Inventory Control - Manual (Page 436)

InventoryControl Printable Help
First, select Yes or No under the question "Do you plan to print from the mobile device?". If
you select No, the Finish button will become enabled. Click Finish to complete the setup
process. If you select Yes, select one of the following options:
Yes, I will be printing from a network printer - select this option if you will be printing to a
printer on your network. You do not need to do anything else to enable printing. Click Finish to
complete the setup process.
If you will be printing from network printer, you will need to manually enable InventoryControlRF
to locate your printer. For instructions on how to do this, please refer to the section
Enabling
InventoryControl RF to Communicate with your Network Printer , below.
OR
Yes, I will be printing with a Laser Mobile Printer - select this option if you will be printing to a
laser mobile printer. You will need to enter a COM Port and Baud Rate for this printer. Click
Finish to complete the setup process.
OR
es, - I will printing with a Receipt Mobile Printer - select this option if you will be printing to a
r. Click
inish to complete the setup process.
Y
receipt mobile printer. You will need to enter a COM Port and Baud Rate for this printe
F
20.9.2 Enabling InventoryControl RF to Communicate with your Network Printer
1. On your PC, navigate to Control Panel > Administrative Tools > Services.
421