Wasp Barcode Inventory Control - Manual (Page 314)

InventoryControl Printable Help
5. Click Next if you want to proceed to the PC to Mobile Device tab where you can send the
database you just created to the device.
Click Back to restart the Filter Records dialog.
Click Cancel if you want to avoid transferring the newly created PDT database to the PDT at this
time. The Create PDT Database screen will close. The database you just created for the PDT
can still be transferred later.
6. You are now ready to send the database to the PDT. For more information, please refer to the
WDT2200 - Sending Data to the PDT topic.
19.3 WDT2200 - Sending Data to PDT
The Send Data to PDT function is used to transfer data from the PC to the PDT. You will need to create
the mobile database first on the Create PDT Database tab before using this function. For more
information on creating the database, please refer to the
WDT2200 - Creating the PDT Database topic.
Sending Data to the PDT:
1. If you are continuing the setup process, click the Next button at the bottom of the Create PDT
Database tab, or click the PC to Mobile Device tab. (You must create the mobile database
before you can send it to the device.) Please refer to the
WDT 2200 - Creating the PDT
Database topic for more information.
OR
299