Wasp Barcode Inventory Control - Manual (Page 335)

InventoryControl Printable Help
ESC=Cancel
As shown above, if you enter a Location or Supplier that's not currently in the PDT database, you
will be prompted to accept or reject the entry as a new value to be added to the database. The
currently selected
Source Site will be displayed when you are about to create a new Location.
4. Press the ENT key to accept the new value or the ESC key to Cancel the creation of a new
Location or Supplier.
Add
123
Monitor
Qty:
ESC=Cancel
F1=Prev F4=Next
Key in the inventory quantity being added and press Enter to complete the Add transaction. The
Qty value entered must be numeric and it must be greater than zero.
NO TRACK BY FIELDS: If this Item does not have enabled for the Date Code, Pallet or Lot
fields, a screen like the one above will be shown, prompting the entry of Qty.
TRACK BY FIELDS: If this Item does have enabled for Date Code, Pallet or Lot fields, a screen
like the one below will be shown, expecting input for each Tracked By field that's enabled. In this
example, Date Code is required for this item:
Add
123
Monitor
Date Code:
ESC=Cancel
F1=Prev F4=Next
Key in or scan values for each of the Tracked By fields, pressing F4 to advance to the next data
entry field.
If you press F4 to advance to the next data entry field, without first inputting a required Tracked By
value, a screen similar to the following will be displayed:
Please scan or key
in Date Code
ESC=Exit
Press ESC to exit the error message and then provide the required Tracked By value (a Date
Code, in this example).
320