Wasp Barcode Inventory Control - Manual (Page 417)

InventoryControl Printable Help
12. After checking to make sure the device is connected to your PC, click Next. A status bar will
appear as the data is transferred. A confirmation message appears after the transfer is complete:
13. Click Finish to close the Wizard screen.
14. On the mobile device, you will see a message similar to the following:
Click OK to insert the records into the mobile database. InventoryControl will start automatically
on the device after the transfer.
You can now perform transactions on the mobile device.
After you have performed transactions on the mobile device, you need to send the data back to the PC.
402