Wasp Barcode Inventory Control - Manual (Page 92)

InventoryControl Printable Help
manufacturer name is entered.
2. Enter information on this screen as needed. The Name and Address Type fields are required,
all other fields are optional.
The software provides you with the ability to enter a Billing Address, Receiving Address and/or
Shipping Address for your manufacturers. To enter multiple address, follow the steps below:
a. On the Company Information screen, enter your company name. Select what type of
address you will be entering from the Address Type drop down menu.
b. Enter the remainder of the address information, then click OK. You will be returned to
the Administration Menu.
c. Click the Company Info icon again. The Company Information screen will reappear
populated with the information you just entered.
d. Select a different address type of the Address Type drop down menu. The address lines
(Address 1 and 2, City, State, Postal Code and Country) will clear while all other
company information will remain on the screen.
e. Enter the new address information, then click OK. Repeat these steps for each address
type.
3. When you have finished entering data in the General Information tab, click the Additional tab
(this tab is optional).
77