Wasp Barcode Inventory Control - Manual (Page 420)

InventoryControl Printable Help
Source: Specify <all> or one of the Sites listed in the drop down list. This determines
which Sites will be shown in the Source Site list on the mobile device.
This is the Site for all inventory transactions to be performed by the device. If you
want the device's database to include Items at more than one Site, select <all>.
You can only select ALL or 1 specific site. For example, if you have 5 sites, you
cannot select 2 to be a Source. You can either select 1 or all.
Destination: If more than one Site is defined on the system and you have selected a
specific Site in the Source Site field, you can select one of the Sites listed in the
Destination drop down list. This determines which Sites will be shown in the Destination
Site list of the mobile device Site Configuration function and which locations will be listed
in the Move To list.
This field will be grayed-out with a value of <all>, as shown above, if only one Site is
defined in InventoryControl or if a value of <all> has been specified for the Source
Site. If a specific Site has been selected for the Source Site, that same site will be
the default value for Destination Site, but you can change the Destination Site to a
different value using the drop down list.
Source Site: Destination
Site:
The Source
Sites Listed in
the Mobile
Device Site
Configuration
will Include:
The
Destination
Sites Listed
in the Mobile
Device Site
Configuration
will Include:
<all>
This value is
forced to <all>
when there is
only one Site
setup in the
system.
<all>
This value is
forced to <all>
when <all> is
specified as
the Source
Site.
All Sites All Sites
A Specific
Site
Destination
Site is the
Same as the
Source Site
The Specified
Source Site
The Same
Site
A Specific
Site
A Different
Site
The Specified
Source Site
The Specified
Destination
Site
As an example, if you have more than two Sites and want to be able to move
inventory from Site 1 to Site 2 -and- from Site 1 to Site 3 on the mobile device, you
will have to create a mobile database for Source Site 1 and Destination Site 2,
transfer the database to the mobile device, use the device for those Moves, send
the information back to the PC, then repeat the entire process beginning with by
creating a second database to do Moves from Source Site 1 to Destination Site 3.
Alternately, if your device has enough memory to hold a database containing
records for all of your Items, at all Sites, you can specify a Source value of <all> and
then control Source Site and Destination Site on the mobile device (see Windows
Mobile Device - Configuring Sites for more information.
405