Wasp Barcode Inventory Control - Manual (Page 337)

InventoryControl Printable Help
another Add. PO, Supplier and Tracked By values, if any, for this second Add will be the same as those
supplied at the beginning of the loop, if any.
123
Qty:
Location:
Total Qty:
10.00000
F4=Done
While looping on Location, all that is required for each Add are values for Qty and Location. The Total
Qty field is incremented each time an Add is submitted while looping.
Press the ENT key to submit the Add transaction and continue looping or press the F4 key to exit the
loop.
Looping on Item Number:
Fields can be looped, or pinned, by pressing the F3 key.
In the following example, F3 was pressed when prompted for Item #:
Add
Item #:
*
Scan or key in value
and press Ent.
Press ESC for Menu
Above, the asterisk (*) indicates the intention to loop on Item #. Values entered for Location, PO,
Supplier and any Tracked By fields (other than Serial Number) will remain locked after entering them for
the first Add:
Qty:
Item #:
Count:25
F4=Done
Above, having pressed F3 when prompted for Item # and then having entered the item number and
values for Location, PO, Supplier, any Tracked By's, and a value of 25 for Qty, this screen is ready to
receive Qty and Item # inputs for the second Add. The Location, PO, Supplier, and any Tracked By
values just specified will be used with every Add transaction entered until F4 is used to exit the loop.
322