Wasp Barcode Inventory Control - Manual (Page 361)

InventoryControl Printable Help
Key in the inventory Qty being Moved and press F4 or ENT to complete the Move transaction.
The Qty value entered must be numeric and it must be greater than zero.
If the Allow Negative Quantities on Mobile Devices option is disabled, you will see the
following message if you attempt to Move more quantity than that which is available for this Item
at the specified From location.
Available:
15.0000
Not enough qty avail
able to complete the
transaction.
ESC=Exit
Press ESC and enter a value that does not exceed the Available amount.
6. If the Item does have Tracked By enabled for Date Code, Pallet or Lot fields, a screen like the
one below will be shown, expecting input for each Tracked By field that's enabled before entering
a value for Qty.
Move
100068
Paint Can
Pallet:
ESC=Cancel
F1=Prev F4=Next
Key in or scan values for each of the Tracked By fields, pressing F4 to advance to the next data
entry field.
If you press F4 to advance to the next data entry field, without first inputting a required Tracked
By value, a screen similar to the following will be displayed:
Please scan or key
in Pallet
ESC=Exit
Press ESC to Exit the error message and then provide the required Tracked By value (a Pallet,
in this example).
Note: If the Allow Negative Quantities on Mobile Devices option is disabled, any entered
Tracked By value that does not match a value associated with inventory available at the
previously specified From location, the following screen display will be displayed:
No item with this tr
ackby specific in st
ock
ESC=Exit
346