Wasp Barcode Inventory Control - Manual (Page 357)

InventoryControl Printable Help
Looping on a Tracked By (other than Serial Number)
Here, for example, F3 was pressed when prompted for Pallet while doing an Audit for this Item:
Audit
123
Monitor
Pallet:
*
ESC=Cancel
F1=Prev F4=Next
An asterisk (*) indicates the intention to do more than one Audit for this Item #, for more than one Pallet.
Values entered for Item #, Location, PO, Supplier, and any other Tracked By fields will remain locked
while looping on Pallet, after entering them for the first Audit:
123
Qty:
Pallet: *
Total Qty:
30.00000
F4=Done
Above, having entered a value for Pallet and a value of 30 for Qty on the previous screen for the first
Audit, this screen is ready to receive inputs for another Audit. Item #, Location, PO and Supplier values
for this second Audit will be the same as those supplied at the beginning of the loop.
While looping on this Tracked By field, all that is required for each Audit are values for Qty and Pallet.
The Total Qty is incremented each time an Audit is submitted while looping.
Press the ENT key to submit the Audit transaction and continue looping
or
Press the F4 key to exit the loop.
When looping on a Tracked By field, all items entered should have the same Tracked By requirements. If
a different Tracked By field is required, you will be prompted to enter the information before continuing.
Looping will need to be restarted.
342