Wasp Barcode Inventory Control - Manual (Page 456)

InventoryControl Printable Help
3. Click OK. The following message displays.
4. Click Yes. The fields are now reset in the Add screen.
If no errors display, this indicates that both the addition of the Location and the Item were
successful.
To verify that the addition was successful, enter the Site with which the Location you added is
5.
associated, then tap the Search icon next to the Location field.
6. The Search Locations screen displays, and the Location you added displays in the Location
list.
See the Mobile Device Troubleshooting topic if you encounter errors while using this function.
441