Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 137)

Creating a Sample Application File
Chapter 5
5-23
8. Choose Move Text, then use the arrow keys to move the title into
position. The worksheet indicates that the title’s top left corner should
be at Row 11, Column 17. Press Enter.
9. Once the title is in place, go to the Exit menu and choose Exit and
Save Object.
10. Then choose Quit in the Text/Draw menu. This returns you to the
Add menu.
Add One Momentary (Normally Open) Push Button
Screen 2 has ten push buttons: five Momentary (Normally Open) push
buttons, and five Momentary (Normally Closed) push buttons. Follow
these steps to create one Momentary (Normally Open) push button. Then
make the others in the same way. Check the worksheets for the different
attributes of the various buttons you are creating.
The Momentary (Normally Open) push button is the On button for the
front conveyor.
To add it to the screen:
1. Choose Push Buttons from the Add menu.
2. Choose Momentary (N/O) from the Push Buttons menu.
Figure 5.34
The Push Buttons Menu
20068
Add
Push Buttons
Control Selectors
Screen Selectors
Indicators
Numerics
Text/Draw
Text/Draw
Text/Draw
Text/Draw
Text/Draw
Text/Draw
Quit
Push Buttons
Momentary (N/O)
Momentary (N/C)
Latched
Maintained
Interlocked
Quit
Once the button is selected, it appears on the screen as an empty square.