Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 177)

File Operations
Chapter 6
6-3
To Copy a File:
1. Select the file in the Application Files menu.
2. Choose Copy File and press Enter. The Copy File menu will open.
3. To change the destination directory, choose Directory and type the
directory name.
4. Choose Copy File to:, then type the name of the new file and press
Enter.
Figure 6.3
The Files Menu
20112
MAIN MENU: Develop Transfer Reports Files Setup Exit
MAIN MENU: Develop Transfer Reports File Setup Exit Files
Application Files
Hex Files
Quit
Application Files
Select File EXAMPLE
Copy File
Delete File
Quit
Copy File
Copy File to: EXAMPLE2
Directory C:\PDS
Quit
Choose Delete from the Application Files menu to delete the selected file.
To rename a file, choose Rename File to: and type in the new name.
You can print reports to document the screens, objects and functions in the
application file you are developing. You can print these reports on a printer
or send them to a disk file.
If you want printouts of the graphic images on your screens, your printer
must be able to print the IBM extended character set.
To print a report:
1. Choose Reports in the Main Menu.
2. In the Reports menu choose Select File to display the list of
application files.
Printing Reports