Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 50)

Using PanelBuilder
Chapter 3
3-14
For more information see Chapter 7, Information and Alarm Windows.
Figure 3.11
The Windows Menu
20019
FILE MENU: Screens Windows Options Communicup Exit Windows
Alarm Window Disable
Information Window Disable
Terminal Fault Window
Alarm History Screen
Alarm Status Screen
Numeric and Security Entry Window
Quit
Alarm Window allows you to configure an alarm window for the
application file being edited. You can specify the alarm and information
messages and configure them to sound the alarm, trigger the alarm relay,
or print an alarm. You can also specify color (for a color terminal) and
size of the window, assign the PLC control address, define how alarm
acknowledgement will be communicated to the PLC controller, and
choose from various PLC controlled options.
Information Window allows you to configure an information window
for the application file being edited. You can specify the information
messages, the color (for a color terminal) and size of the information
window, assign the PLC control address, and enable an acknowledge
indicator that tells the PLC controller when a message has been
acknowledged.
Terminal Fault Window permits you to set the colors for the Fault
Window on a color PanelView terminal.
Alarm History Screen permits you to set the screen number for the
alarm history screen, and for a color terminal, set the screen colors.
Alarm Status Screen permits you to set the screen number for the
alarm status screen. It also allows you to enable/disable the Alarm
Status Reset Button, set the PLC Controlled Qty/Time Reset address,
and set the Qty/Time Reset to PLC Controller. Finally, in this screen you
can set the screen colors for a color terminal.
Numeric and Security Entry Window allows you to set the Numeric
Entry and Security Window colors on a color system.