File operations chapter 6 – Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL User Manual
Page 187
![background image](/manuals/580781/187/background.png)
File Operations
Chapter 6
6-13
Figure 6.11
The Transfer Menu
23639
MAIN MENU
Develop
Transfer Reports FilesCopy File Setup Exit
Transfer
Download to PanelView (RS-232)
Upload from PanelView (RS-232)
Pass-Through Download to PanelView (DH+ and Remote I/O)
Pass-Through Upload from PanelView (DH+ and Remote I/O)
Burn EPROMS
Burn Single EPROM
Quit
4.
Choose Select File to select the application file for downloading. If
necessary, choose Directory and type in the correct disk and directory.
Figure 6.12
Download to PanelView Menu
23639
MAIN MENU
Develop
Transfer Reports FilesCopy File Setup Exit
Transfer
Download to PanelView (RS-232)
Upload from PanelView (RS-232)
Pass-Through Download to PanelView (DH+ and Remote I/O)
Pass-Through Download to PanelView (DH+ and Remote I/O)
Burn E
Burn Single EPROM
Quit
Download to PanelView (RS-232)
Select File
EXAMPLE1
Directory
C:\PDS
Quit
EXAMPLE1
13:37:22 05/28/90 16985 bytes
EXAMPLE2
09:44:10 05/28/90 17201 bytes
EXAMPLE3
11:36:03 05/18/90 17045 bytes
5.
Choose Download FILENAME (where FILENAME is the name of the
selected file), and respond Yes when prompted to start downloading.
You can cancel the transfer at any time by pressing the Esc key.