6ć12, Configuration mode menu, File operations chapter 6 – Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL User Manual
Page 186: Downloading to panelview
File Operations
Chapter 6
6-12
Application Size: See Downloading Considerations later in this chapter.
Downloading to PanelView
To download means to transfer an application file from the development
computer to a PanelView terminal so that the application file can be run.
To download:
1.
Connect the PanelView terminal to the development computer with
the Upload/Download cable.
2.
Set the PanelView terminal to Configuration Mode and choose
Upload/Download from the terminal’s Configuration Mode Menu.
Figure 6.10
Configuration Mode Menu
23636
Up
Cursor
Firmware Rev 05.00.00 06/21/93 (050900)
06/21/93 05:36:59 AM
Application File Name: DEMO
10801 Bytes Used, 52175 Bytes Free
CONFIGURATION MODE MENU
"
Down
Cursor
Enter
Upload / Download
Serial Port
Rack Assignments
Access Codes
Audio Response
Alarm Relay
Preset Operations
Time and Date
Screen Saver
Screen Alignment
Stuck Button Timeout
User EPROM/EEPROM Power-up Test
Pass-Through Download Options
Unit Tests
3.
On the development computer, choose Download to PanelView
(RS-232) from the Transfer menu.