Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 253)

Chapter
8
8-1
Screen Operations
This chapter describes the operations that can be performed on screens, and
the special attributes that can be assigned to them. For example, screens
can have restricted access for security reasons, and one screen can be
assigned as the first screen displayed when the PanelView terminal is
switched on.
With an application file selected, open the Screens menu and choose
Utilities to copy, rename, or delete a screen in the application file. Security
is discussed immediately following this section.
Figure 8.1
The Utilities Menu
20147
FILE MENU: Screens Windows Options Communications Exit Screens
Select Screen 1 TEST SCREEN
Create New Screen
Utilities
Powerup Screen
Application Note
Quit
Utilities
Select Screen 1 TEST SCREEN
Delete Screen
Secure Screen
Copy Screen to: 3
Rename Screen to: TEST SCREEN
Quit
FILE MENU: Screens Windows Options Communications Exit
Select Screen allows you to choose a screen for the following operations:
Delete Screen removes the selected screen from the application file.
Secure Screen is discussed in the Security section immediately
following this section.
Basic Utility Functions