Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 138)

Creating a Sample Application File
Chapter 5
5-24
Open the Move & Size menu and set the parameters as follows:
Figure 5.35
The Move and Size Menu
20077
OBJECT MENU: Move & Size Look States & Text Address Utility Exit
OBJECT MENU: Move & Size Look States & Text Address Utility Exit Move & Size
Move
Size
Function Key 0
Quit
1. Choose Move from the Move & Size menu and use the arrow keys to
place the button at Row 16, Column 11.
2. Choose Size, and use the arrow keys to shrink the button to Width 8,
Height 3.
3. Choose Function Key and link the button to Function Key 2.
The next step is to open the States & Text menu to label the button. This
button has two states:
State 0 indicates the Front Conveyor is Off
State 1 indicates the Front Conveyor is On