Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 55)

Using PanelBuilder
Chapter 3
3-19
Figure 3.16
PLC Inhibit Bit Address Menu
23590
PLC Inhibit Bit Address
Current Address Unassigned Address
Data Type Bit
Communications Discrete
Input/Output Output
Rack 1
Start Word 0
Start Bit 0
Number of Bits 1
Update Address
View Address Map
Delete Address
Quit
Make the settings you require, and then choose Update Address to make
the settings current.
The Communications Menu
Choose Communications from the File menu to open the Communications
menu. Within this menu you can make rack assignments, assign block
transfer files, set the PLC baud rate and set up pass-through configuration
addresses.
Figure 3.17
The Communications Menu
22021
FILE MENU: Screens Windows Options Communicup Exit Communications
PLC Type PLC-5/15 integral
Rack Assignment
Block Transfer
PLC Baud Rate 57.6K
Pass-Through Configuration
Quit
PLC Type allows you to choose from a menu of supported PLC types.