Rockwell Automation 2711 PANELBUILDER SOFTWARE USER MANUAL - Manual (Page 68)

Using PanelBuilder
Chapter 3
3-32
Assign Screen to State (Screen List Selector only). For each selection
in the list you must designate the screen you want to display.
Edit Text allows you to type in the text for each selection. Use the
arrow keys to move the cursor from one line to the next when typing;
press Enter when you have finished entering all the text in the list.
Move Text allows you to move text within the list.
Border specifies the List Selector border type.
Highlight Bar allows you to select a highlight bar for the Object List in
the Scrolling List object. When you enable this option, the selected
object in the Object List is highlighted in reverse video.
States and Text
States & Text allows you to define text and display attributes for State 0,
State 1 and Outer Text of all buttons except the Interlocked push button.
For the Multi-State Indicator, States & Text allows you to define up to 16
states. First define the number of states for the Multi-State Indicator, then
define the text and display attributes for each state.
Display States lets you press the space bar to view the state settings you
have defined.
Edit Text allows you to enter text for the object. State Text appears
inside the object; Outer Text appears outside the object.
Move Text moves the state text inside the object.
Underline makes the state text appear underlined.
Blink causes the state text to flash on the PanelView terminal.
Foreground Color sets the color of the state text and border.
Background Color sets the color of the object.
Reverse Video sets monochrome text to Reverse Video or normal
display.
High Intensity sets monochrome text to High Intensity or normal
display.
Character Height sets the characters to single or double height.
Character Width sets the characters to single or double width.